Metal engraving is the art of tapping designs into metal by hand with a small chisel and a hammer, line by line. The ESPAD HAND engraving collection includes a tall engraved tank and two engraved sugar pot and vase pairs. This guide explains how engraving is done, how to judge hand engraving, which piece to choose and how to look after it.
For the history of the craft, read Ghalamzani (Engraving): A Melody from Pen and Metal in ESPADMAG or the short guide What Is Metal Engraving? in the ESPADLAND shop.
How an engraved piece is made
- Supporting the metal: hollow pieces are filled with a mix of melted pitch and plaster, which supports the metal so it does not dent or get pierced under the hammer.
- Drawing: the design is drawn or transferred onto the surface, often with light guide lines so repeated motifs are evenly spaced.
- Cutting: the engraver chooses a chisel and strikes it with a hammer, changing the force to cut deeper or lighter grooves. A single line can need hundreds of taps.
- Finishing: the pitch is warmed and removed, the piece is cleaned, and some pieces are darkened in the background and polished on the raised parts.
Traditional motifs include arabesque scrolls, flowers and birds, and hunting scenes. Because the design is cut into the metal itself, it does not wear off with use.
How to judge hand engraving
- Lines: clean, confident cuts with even depth, and no slips or scratches outside the design.
- Detail: fine textures in the background and small details in leaves, feathers and figures show a skilled hand.
- Depth and contrast: in relief work, the design should stand out clearly from the background.
- Balance: the design should fit the shape of the object, with borders that meet neatly.
- Finish: polished areas should be bright and even, and darkened areas should look deliberate, not patchy.
Hand engraving always shows tiny variations. Perfectly identical repeats across a whole piece can be a sign of machine work.
Choosing an engraved piece
- Engraving Tank: a 31 cm tall decorative container covered with hand-engraved patterns from top to bottom, about 350 g, a focal point for a shelf, a console or an entrance table.
- Sugar Pot and Blony Vase 1: a 17.5 cm blony vase with a compact 10.5 cm sugar pot, for a smaller tea tray or a coffee table.
- Sugar Pot and Blony Vase 2: the same 17.5 cm vase with a taller 14 cm sugar pot.
The blony vase holds a few flowers, and the sugar pot holds sugar or chocolates. Because every line is cut by hand, the pattern on your piece will differ a little from the photos.
How to care for engraved metalwork
- Dust it regularly with a soft, dry cloth; a soft brush helps clean the deep lines of the design.
- If the piece has a clear protective coat, do not polish it; wipe it with a soft, slightly damp cloth and dry it.
- Copper and brass slowly darken in contact with air. If your piece has no protective coat, you can clean it now and then with a mild cleaner made for copper or brass, then rinse and dry it well.
- Some owners like the darker tone that develops over time. It does not harm the metal, and you do not have to remove it.
- Keep it in a dry place, and avoid harsh chemicals, salty foods and acidic liquids on uncoated surfaces.
- If you use a piece for serving, line it or use it for dry foods, and wash and dry it soon after use.
Warranty and delivery
Each engraved piece comes with a 5-year personal identification card and warranty. Damage, scratches and maintenance in a humid environment are not covered. See How ESPADLAND Shipping, Delivery and Returns Work for shipping times and returns, and Handmade Gift Ideas for the Holidays for gift ideas.
Frequently asked questions
The engraver taps a small chisel with a hammer, line by line, to cut the design into the metal. Hollow pieces are filled with pitch and plaster for support.
No. The design is cut into the metal itself, so it does not wear off with use.
Copper and brass slowly darken in contact with air. This does not harm the metal. Uncoated pieces can be cleaned with a mild cleaner made for copper or brass.
Both have a 17.5 cm blony vase. Version 1 has a 10.5 cm sugar pot and version 2 a taller 14 cm sugar pot.
Yes. Each piece comes with a 5-year personal identification card and warranty. Damage from a humid environment is not covered.





